Smart Ideas: Homes Revisited

Decorate Your Home or Office with Crown Moulding

Crown moulding is defined as a decorative piece of wood, metal, or plaster that is used to accentuate some places in your home or office. Decoration of this material can be implemented on the exterior or interior of your home or office. The walls, ceilings, windows and door openings of your property can be framed using these mouldings.

A crown moulding can be used as your decorative trim from wall to ceiling thus adding beauty to any space or room. The importance of a crown moulding is as significant as choosing a frame for an expensive painting. It is advisable that you choose your crown moulding in harmony with the concept of your home interiors. It is suggested that when you choose the crown moulding, be concern of its size or design so as not to underestimate the look of the area it is incorporated. Some homeowners would choose crown moulding to suit their personal style, and this shows the importance of this accent piece.

Crown moulding is generally installed along the seams where the wall meets the ceiling in a room.
The Beginner’s Guide to Services

It is an excellent way to enhance the beauty and glamour of your home or office and increase the value of the place by installing crown moulding.
A Quick History of Houses

There are some guidelines to follow before a crown moulding is installed.

The first preparation is by locating all the studs in your walls and ceiling joist. You can do this by making some light pencil marks at the point where you see the crown moulding up as you nail it.

Next is to figure out which way the ceiling joists run. In a square room, this preparation is important because you have only the nailers for the top of your trim on two of the four walls.

Using a framing square is another easy way to find the size of the triangle nailer. The nailer actually does not need to fit perfectly in order to work effectively.

Another tip is not to force the nailer to the moulding that in effect will not sit flush against the wall and ceiling, and do this by leaving a little room.

Next preparation is to install the nailers on the walls without the ceiling nailers. Position the nailer against the wall and ceiling, then pre-drill the nailer using a counter sink drill bit into the studs on the walls. Then, attach to the stud using a 3 inches coarse thread drywall screw.

The next guideline is to provide a reference line on the wall on where the height of the moulding would sit on the wall. This can be done by taking a piece of scrap moulding, place it against the wall and ceiling in a proper way, and then writing lightly on the wall with a pencil at the bottom of the moulding.